Apologies for the non showing of the last round of the ROC but I am having technical difficulties which are proving rather entrenched. There are also lasting problems with posting to the club’s Facebook Page via the blog. Ah well, such is life. Last meeting was all about light painting and our thanks go to Myk Garton and Tony Cullen [EDIT not Cooney as originally published] for their efforts and Megan Gearing for being the model once again. Definitely a fun night.
Essentially light painting takes advantage of the camera’s ability to take long exposures, it’s relatively limited dynamic range, a dark background and some bright lights either as illumination on a subject or as a subject themselves. It is not an expensive thing to set up and you can get some striking results relatively easily. Equipment is a tripod or place to secure your camera preferably capable of being set to fully manual (Bulb) and, optionally, a remote shutter release, a light source and some darkness. You have a variety of options what you do with the light, depending upon what the source is, from outlining everyday objects with light using a single LED all the way up to multiple exposure big item, multiple flash set ups, cityscapes and landscapes. It is one of those things that really does apply to pretty much any subject.
Light Painting is all about the what copious amounts of dark do to light, colour and contrast when exposed on a digital processor or film. Given the amount of trial and error it really does play to the cost advantages of digital and even then there are time savings to be had through simple things like turning off your camera’s long exposure noise reduction until the final shot, (which will halve the exposure processing time) or working out exposure with the 6 stop rule. This is based on a fairly simple piece of mathematics and lies within the exposure triangle. If you set your camera’s ISO to 6400 whilst you get the shot composed and exposure sorted, then, using the metering in seconds recorded in the test shots, reset to ISO 100 and expose in minutes, e.g. a 10 second ISO 6400 shot is a 10 minutes at ISO 100, a 4 second exposure at 6400 is a 4 minute exposure at 100 ISO etc. ISO 100 is six stops slower than ISO 6400, hence the name, and it works for the identical aperture setting.
I would turn the long exposure noise control back on when all the groundwork has been done (and leave it on as default) because it works to a quite significant advantage in the quality of the final image. That said different sensors have different sensitivities and you may well get 5 or 10 second exposures without significant noise intrusion, and that is best at low ISO’s, though I don’t know of any digital sensors to match The Kono! Donau’s film speed of ISO 6 (marketed as ideal for light painters) from Lomo (though at £27 for three rolls I am in no hurry to find out). It’s a relatively simple thing to check out where your camera starts to produce intrusive noise using test exposures at minimum ISO and worth knowing for your camera. I have seen the figure of a 30db Signal to Noise Ratio as being “acceptable” to “professionals” – frankly I have no idea, though DXO measure these sort of things. What is acceptable is subjective and individual. Go and find out for your camera.
Of course photography is Greek for painting with light, but, as defined above light painting makes more of the dark. Light painting scenes have, by design, higher contrast than will be found in most photographs and will also, most likely, require some post production to fix light leaks or darken weakly lit areas. The fact that we are dealing with opposite ends of the histogram actually helps as getting rid of distracting background detail can often be achieved with a simple adjustment of the contrast slider. Yes that is a broad generalisation because every frame is different, but with the single frame light painting the reduced colour palette and high contrast actually don’t often require much fiddling around.
Not that some people are content to leave it at that. The techniques can usefully be extended from drawing with a light against a very dark background, through illuminating an object or objects via a single light source, to full blown composites of hundreds of frames of sometimes very large objects. All can come under the light painting banner, and can, I suspect be labelled on a scale from interesting to obsessive, depending on where you stand (and what equipment you have access to), but there is another relatively cheap and easy-with-the-right-techniques that you can access. Light trails. In a lot of ways we have already talked about this earlier in this post, when we talked about single lights, but you have many options in making those. And don’t forget star trails, vehicle lights, trains, boats and planes – it doesn’t have to be you in charge of the lights, though that helps in organising the outcomes. Light painting is a fine way of capturing some vibrant images, give it a try.
N e x t M e e t i n g
Returning our visit earlier in the season we welcome Hanham Photographic Society.
Tutorial on Low Light, Long Exposure, Cityscapes & Architecture
This Thursday Richard Price & Mark Stone are going to give you a tutorial on Long Exposures, Low Light, Cityscapes & Architecture Photography. They’ll be talking you through the equipment that you’ll need and showing examples of their work. You’ll be able to ask questions and learn how they construct their images from setting up the shot, composition and how they take the Photograph so that it fits in with how they want to process it. You’ll probably be surprised by the look of the pictures when they come out of the camera but they are purposely taken to have the most data within the image file to make processing them easier. They’ll explain why it’s just as, if not more, important to consider what is going to be done to the image after it’s been taken than when you’re about to press the shutter button.
Confused? Don’t worry all will be revealed.